Difference between revisions of "DW780 Unibus Adapter"
m (syntax) |
m (Move to new subcat) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 21: | Line 21: | ||
* [http://www.bitsavers.org/pdf/dec/vax/780/MP00497_DW780_Dec77.pdf DW780 Field Maintenance Print Set] (MP-00497) | * [http://www.bitsavers.org/pdf/dec/vax/780/MP00497_DW780_Dec77.pdf DW780 Field Maintenance Print Set] (MP-00497) | ||
| − | [[Category: | + | [[Category: VAX Superminis]] |
[[Category: UNIBUS]] | [[Category: UNIBUS]] | ||
Latest revision as of 00:57, 7 May 2024
The DW780 Unibus Adapter was a UNIBUS bus translator for the VAX-11/780's Synchronous Backplane Interconnect.
It was implemented on four hex cards:
- M8270 - UBA SBI Interface (USI)
- M8271 - UBA Control Board (UCB)
- M8272 - UBA Map and Data Path (UMD)
- M8273 - UNIBUS Address and Interrupt (UAI)
They mount in a custom 6-slot backplane (normally mounted next to the main CPU backplane). 2 slots (on the back of the backplane) are used to hold double-width i) M9044 UNIBUS terminator, and ii) an M9042 paddle card, which carries the UNIBUS out on three flat cables (DEC part number 70-133622-00), normally to an 'expansion I/O connector' on the side of the cabinet, and thence to a BA11-K mounting box mounted in an expansion cabinet. (There are some 'UNIBUS VAX' configurations where there is a DD11-C or DD11-D backplane in the main cabinet; in these, the flat cables run directly to an M9014 paddle card in the DD11. See pp. 15-16 and 65 of MP00539 for coverage of this configuration; see also chapter 12 of the 'VAX-11/780 Installation Manual'.)
External links
- DW780 Unibus Adapter Technical Description (EK-DW780-TD-001)
- DW780 Field Maintenance Print Set (MP-00497)
