Search results

From Computer History Wiki
Jump to: navigation, search

Page title matches

  • Both of these cards use the header pinout given below, so they may be used interchangeably. Following standard electr
    7 KB (1,232 words) - 12:48, 16 October 2021
  • 7 KB (1,240 words) - 01:17, 16 June 2022
  • The table below provides the complete, detailed pinout (as far as the Field Maintenance Print Set shows) of the edge connector of
    8 KB (1,587 words) - 16:14, 6 February 2024

Page text matches

  • ==Pinout==
    13 KB (2,043 words) - 23:27, 14 January 2024
  • ...cable. Both of these cards use the [[UNIBUS H854 header pinout|same header pinout]], so they may be used interchangeably. ===Pinout===
    13 KB (2,162 words) - 23:26, 14 January 2024
  • ...m a pre-RK11-C; it clearly seems to be an RK11 panel of some sort, but the pinout of the RK11-C indicator panel connector (engineering drawing "RK11-C Indica
    14 KB (2,038 words) - 23:04, 13 September 2023
  • * [http://pinouts.ru/Slots/vmebus_pinout.shtml VME bus pinout and signals]
    251 bytes (35 words) - 00:26, 20 February 2018
  • The Amiga 1000 had an expansion slot on the site (the pinout was the reverse from the Amiga 500) allowing the addition of RAM expansion
    13 KB (2,120 words) - 00:41, 17 December 2018
  • ...he top edge of the card, using the standard [[DEC asynchronous serial line pinout]].
    3 KB (489 words) - 01:18, 17 February 2023
  • ...he top edge of the card, using the standard [[DEC asynchronous serial line pinout]].
    4 KB (684 words) - 01:20, 17 February 2023
  • ...he top edge of the card, using the standard [[DEC asynchronous serial line pinout]].
    2 KB (378 words) - 19:15, 7 July 2023
  • ...of the card, using the standard 10-[[pin]] [[DEC asynchronous serial line pinout]]. They both provided [[EIA RS-232 serial line interface|EIA RS-232]] conne
    3 KB (507 words) - 10:58, 29 March 2022
  • ...m the positive bus used by the controller to the negative bus. This is the pinout of the negative bus:
    9 KB (1,330 words) - 01:11, 10 February 2024
  • ...but the pinout was retained. (For the pinout of an SPC slot, see [[UNIBUS#Pinout|here]].) ==Pinout==
    5 KB (868 words) - 23:38, 9 April 2022
  • ===Pinout===
    4 KB (708 words) - 16:06, 30 March 2023
  • ...7859 card, is, as mentioned, a 20-conductor flat cable, with the following pinout: The pinout for J2 (used in both) is (pin identifications are given in both numeric and
    7 KB (1,114 words) - 20:56, 24 October 2022
  • ==Pinout==
    4 KB (731 words) - 17:11, 6 February 2024
  • Both of these cards use the header pinout given below, so they may be used interchangeably. Following standard electr
    7 KB (1,232 words) - 12:48, 16 October 2021
  • ...he top edge of the card, using the standard [[DEC asynchronous serial line pinout]].
    7 KB (1,055 words) - 17:22, 6 February 2024
  • ===Pinout===
    3 KB (556 words) - 16:00, 6 February 2024
  • ...e cable plugs into slot D12, and on the KA11 end, into slot B09. The cable pinout is:
    9 KB (1,637 words) - 18:11, 2 July 2023
  • ...standard dual-width [[BC11-A]] cable, as used for the UNIBUS. This is the pinout for the TM11 (the other two are basically identical to this):
    10 KB (1,388 words) - 02:36, 10 February 2024
  • * [[KDF11-U CPU pinout]]
    6 KB (1,087 words) - 16:16, 6 February 2024

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)