Difference between revisions of "FP11-C Floating-Point Processor"

From Computer History Wiki
Jump to: navigation, search
(update to use fp11 article)
m (Better cat)
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
The '''FP11-C''' was a [[Floating point processor|FPP]] used in the [[PDP-11/45]] and [[PDP-11/70]] computers (the later KB11-D and KB11-C CPU variants thereof, respectively); it was program-compatible with the [[FP11-B Floating-Point Processor]], which was the progenitor of the semi-standard [[FP11 floating point]] used in many later [[PDP-11]]s.
+
The '''FP11-C''' was a [[Floating point processor|FPP]] used in the [[PDP-11/45]] and [[PDP-11/70]] computers (the later [[KB11-D CPU|KB11-D]] and [[KB11-C CPU|KB11-C]] [[Central Processing Unit|CPU]] variants thereof, respectively); it was [[program compatible]] with the [[FP11-B Floating-Point Processor]], which was the progenitor of the semi-standard [[FP11 floating point]] used in many later [[PDP-11]]s.
  
−
Like the FP11-B, it operated in parallel with the main processor, so that two instructions (one floating point, one regular) could be processed at the same time; unlike the FP11-B, it used an internal clock which is synchronized to the basic CPU's clock.  
+
Like the FP11-B, it operated in parallel with the main processor, so that two [[instruction]]s (one floating point, one regular) could be processed at the same time; unlike the FP11-B, it used an internal [[clock]] which is synchronized to the basic CPU's clock.  
  
 
==Implementation==
 
==Implementation==
Line 12: Line 12:
 
* M8127 Fraction Data Path - Low Order
 
* M8127 Fraction Data Path - Low Order
  
−
{{PDP-11}}
+
==Further reading==
  
−
[[Category:UNIBUS processors]]
+
* ''FP11-C floating-point processor user's manual'' (EK-FP11C-OP-001)
 +
 
 +
==External links==
 +
 +
* [http://www.bitsavers.org/pdf/dec/pdp11/1170/EK-FP11C-MM-01_FP11C_May76.pdf FP11-C floating-point processor maintenance manual] (EK-FP11C-MM-001)
 +
* [http://www.bitsavers.org/pdf/dec/pdp11/1145/FP11-C_Field_Maintenance_Print_Set_MP00038_NoRev_Dec75.pdf FP11-C Field Maintenance Print Set] (MP00038)
 +
 
 +
[[Category: PDP-11 UNIBUS Processors]]

Latest revision as of 02:18, 13 October 2022

The FP11-C was a FPP used in the PDP-11/45 and PDP-11/70 computers (the later KB11-D and KB11-C CPU variants thereof, respectively); it was program compatible with the FP11-B Floating-Point Processor, which was the progenitor of the semi-standard FP11 floating point used in many later PDP-11s.

Like the FP11-B, it operated in parallel with the main processor, so that two instructions (one floating point, one regular) could be processed at the same time; unlike the FP11-B, it used an internal clock which is synchronized to the basic CPU's clock.

Implementation

It plugged into special pre-wired slots in the CPU's backplane, and included the following boards:

  • M8128 ROM and ROM Control
  • M8129 Exponent and Data Path
  • M8126 Fraction Data Path - High Order
  • M8127 Fraction Data Path - Low Order

Further reading

  • FP11-C floating-point processor user's manual (EK-FP11C-OP-001)

External links

Retrieved from "https://gunkies.org/w/index.php?title=FP11-C_Floating-Point_Processor&oldid=27838"