RP06 disk drive

From Computer History Wiki
Jump to: navigation, search


RP06
Manufacturer: Memorex (basic drive), Digital Equipment Corporation (electronics)
Drive Controller(s): RH10 (PDP-10)
RH20 (KL10)
RH11 (UNIBUS)
RH70 (PDP-11/70)
RH780 (VAX-11/780)
RH750 (VAX-11/750)
Capacity: 176 Mbytes
Transfer Rate: 806 KB/s (peak)
Average Access Time: 38.3 msec
Revolutions per Minute: 3600
1/2 Revolution Time: 8.3 msec
One Track Seek Time: 10 msec
Average Seek Time: 30 msec
Total Surfaces: 20 (19 data, 1 servo)
Tracks per Surface: 815
Sectors per Track: 22
Words per Sector: 256
Tracks per Inch: 384
Density: 4040 bpi (maximum)
Recording Method: Modified Frequency Modulation (MFM)
Physical Size: 33" W x 47" H x 32" L
Weight: 600 pounds
Power Consumption: 660 VA per phase (running); 3300 VA per phase (starting, 10 seconds max)


The RP06 was the successor to the RP04 and RP05 multi-platter large disk drives. The actual drive was a Memorex 677-01, OEM'd by DEC, who added interface electronics.

As a MASSBUS device, it did not have a specific device controller, but used the appropriate MASSBUS controller. A maximum of 8 drives were supported per controller; drives could be dual-ported, to allow access from two different controllers.

The block headers are protected by a CRC, and the data by an ECC.

See also

External links