Difference between revisions of "KL10"
From Computer History Wiki
(Microprogrammed, inspired by F1) |
(Link to F-1) |
||
| Line 23: | Line 23: | ||
}} | }} | ||
| − | The '''KL10''' was the third generation of [[PDP-10]] processors. It was built out of [[ECL]], on [[DEC card form factor|hex]] cards. It was the first [[Microcode|microprogrammed]] PDP-10 processor; the design was inspired by [[Foonly]]'s F-1 | + | The '''KL10''' was the third generation of [[PDP-10]] processors. It was built out of [[ECL]], on [[DEC card form factor|hex]] cards. It was the first [[Microcode|microprogrammed]] PDP-10 processor; the design was inspired by [[Foonly]]'s [[F-1]] |
It was used in the [[DECsystem-10]] models 1080 and 1090 systems (with an external memory bus, compatible with the earlier [[KA10]] and [[KI10]]), and the [[DECSYSTEM-20]] 20xx systems (with an internal memory bus). | It was used in the [[DECsystem-10]] models 1080 and 1090 systems (with an external memory bus, compatible with the earlier [[KA10]] and [[KI10]]), and the [[DECSYSTEM-20]] 20xx systems (with an internal memory bus). | ||
Revision as of 06:21, 8 January 2018
| KL10 | |
| Manufacturer: | Digital Equipment Corporation |
|---|---|
| Architecture: | PDP-10 |
| Year Design Started: | January, 1972 |
| Year First Shipped: | June, 1975 |
| Form Factor: | mainframe |
| Word Size: | 36 bits |
| Logic Type: | ECL ICs |
| Design Type: | clocked synchronous, microcoded |
| Microword Width: | 80 |
| Microcode Length: | 1280 (Model A) 2K (Model B) |
| Clock Speed: | 500 nsec |
| Cache Size: | 2K words |
| Memory Speed: | 1.0 μsec (initial core memory), 500 nsec (later MOS main memory) |
| Physical Address Size: | 22 bits |
| Virtual Address Size: | 18 bits (Model A and B) 23 bits (Model E) |
| Memory Management: | paging, 512-word pages |
| Operating System: | TOPS-10, TOPS-20, ITS, WAITS, TENEX |
| Predecessor(s): | KI10 |
| Successor(s): | none |
| Price: | US$250K (CPU), US$600K-1.2M (system) |
The KL10 was the third generation of PDP-10 processors. It was built out of ECL, on hex cards. It was the first microprogrammed PDP-10 processor; the design was inspired by Foonly's F-1
It was used in the DECsystem-10 models 1080 and 1090 systems (with an external memory bus, compatible with the earlier KA10 and KI10), and the DECSYSTEM-20 20xx systems (with an internal memory bus).
Like its predecessor, the KI10, it was initially released in a single-processor version; a two-CPU version was released later.
There was a single KL10 ITS machine, MIT-MC. It was later renamed to MX and was shut down in 1988. There was also a KL10 in the Stanford WAITS system.
