Difference between revisions of "KL10"
(Start detaiing variants) |
(Adapters) |
||
| Line 25: | Line 25: | ||
The '''KL10''' was the third generation of [[PDP-10]] processors. It was built out of [[ECL]], on [[DEC card form factor|hex]] cards. It was the first [[Microcode|microprogrammed]] PDP-10 processor; the design was inspired by Stanford's [[Superfoonly]]. | The '''KL10''' was the third generation of [[PDP-10]] processors. It was built out of [[ECL]], on [[DEC card form factor|hex]] cards. It was the first [[Microcode|microprogrammed]] PDP-10 processor; the design was inspired by Stanford's [[Superfoonly]]. | ||
| − | The [[Central Processing Unit|CPU]] had two main | + | The [[Central Processing Unit|CPU]] had two main units, the 'E Box' ('Execution') and the 'M Box' ('Memory'). It provided three types of [[bus]]ses to the rest of the components of the system; the 'E Bus' (from the E Box), and the 'S Bus', and later the 'C Bus' (from the M Box). The S Bus was for the attachment of [[main memory]] units, while the C Bus alowed [[Direct Memory Access|DMA]] accesss to main memory. |
| − | There were a number of variants over the lifetime of the KL10; the most significant division being between ''systems'' with an external memory bus(compatible with the earlier [[KA10]] and [[KI10]]), and | + | There were a number of variants over the lifetime of the KL10; the most significant division being between ''systems'' with an external memory bus(compatible with the earlier [[KA10]] and [[KI10]]), and those with an internal memory bus (the native S Bus). |
| − | + | The former included a [[DMA20 Memory Bus Controller]], attached to the S Bus, to provide the external memory bus. Similarly, a [[DIA20 In/Out Bus Contoller]], attached to the E Bus, provided a KA10/KI10 compatible I/O bus. | |
| + | |||
| + | The KL10 was used in the [[DECsystem-10]] models 1080 and 1090 systems (with an external memory bus), and in the larger [[DECSYSTEM-20]] 20xx systems (with an internal memory bus). | ||
Like its predecessor, the KI10, it was initially released in a single-[[processor]] version; a two-CPU version was released later. | Like its predecessor, the KI10, it was initially released in a single-[[processor]] version; a two-CPU version was released later. | ||
| + | |||
| + | ==Well-known KL10's== | ||
There was a single KL10 [[ITS]] machine, MIT-MC. It was later renamed to MX and was shut down in 1988. It is now in storage at the Living Computers Museum. There was also a KL10 in the Stanford [[WAITS]] system. | There was a single KL10 [[ITS]] machine, MIT-MC. It was later renamed to MX and was shut down in 1988. It is now in storage at the Living Computers Museum. There was also a KL10 in the Stanford [[WAITS]] system. | ||
Revision as of 15:00, 5 July 2019
| KL10 | |
| Manufacturer: | Digital Equipment Corporation |
|---|---|
| Architecture: | PDP-10 |
| Year Design Started: | January, 1972 |
| Year First Shipped: | June, 1975 |
| Form Factor: | mainframe |
| Word Size: | 36 bits |
| Logic Type: | ECL ICs |
| Design Type: | clocked synchronous, microcoded |
| Microword Width: | 80 |
| Microcode Length: | 1280 (Model A) 2K (Model B) |
| Clock Speed: | 500 nsec |
| Cache Size: | 2K words |
| Memory Speed: | 1.0 μsec (initial core memory), 500 nsec (later MOS main memory) |
| Physical Address Size: | 22 bits |
| Virtual Address Size: | 18 bits (Model A and B) 23 bits (Model E) |
| Memory Management: | paging, 512-word pages |
| Operating System: | TOPS-10, TOPS-20, ITS, WAITS, TENEX, TYMCOM-X |
| Predecessor(s): | KI10 |
| Successor(s): | none |
| Price: | US$250K (CPU), US$600K-1.2M (system) |
The KL10 was the third generation of PDP-10 processors. It was built out of ECL, on hex cards. It was the first microprogrammed PDP-10 processor; the design was inspired by Stanford's Superfoonly.
The CPU had two main units, the 'E Box' ('Execution') and the 'M Box' ('Memory'). It provided three types of busses to the rest of the components of the system; the 'E Bus' (from the E Box), and the 'S Bus', and later the 'C Bus' (from the M Box). The S Bus was for the attachment of main memory units, while the C Bus alowed DMA accesss to main memory.
There were a number of variants over the lifetime of the KL10; the most significant division being between systems with an external memory bus(compatible with the earlier KA10 and KI10), and those with an internal memory bus (the native S Bus).
The former included a DMA20 Memory Bus Controller, attached to the S Bus, to provide the external memory bus. Similarly, a DIA20 In/Out Bus Contoller, attached to the E Bus, provided a KA10/KI10 compatible I/O bus.
The KL10 was used in the DECsystem-10 models 1080 and 1090 systems (with an external memory bus), and in the larger DECSYSTEM-20 20xx systems (with an internal memory bus).
Like its predecessor, the KI10, it was initially released in a single-processor version; a two-CPU version was released later.
Well-known KL10's
There was a single KL10 ITS machine, MIT-MC. It was later renamed to MX and was shut down in 1988. It is now in storage at the Living Computers Museum. There was also a KL10 in the Stanford WAITS system.
