Difference between revisions of "DF10 Data Channel"

From Computer History Wiki
Jump to: navigation, search
(Add RH10.)
(Unredirect ITS.)
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
The '''DF10 Data Channel''' is a [[channel]] for the early [[PDP-10]] models ([[KA10]] and [[KI10]]) which had the PDP-10 [[main memory]] [[bus]] as a standard bus. It can connect to [[multi-port memory]] banks either directly, or via an [[MX10 Memory Data Multiplexor]]. It is also connected to the system's [[input/output|I/O]] bus, to allow the [[Central Processing Unit|CPU]] to control it.
+
The '''DF10 Data Channel''' is a [[channel]] for the early [[PDP-10]] models ([[KA10]] and [[KI10]]) which had the [[PDP-10 Memory Bus]] as a standard bus. It can connect to [[multi-port memory]] banks either directly, or via an [[MX10 Memory Data Multiplexor]]. It is also connected indirectly (through the [[device controller]]s which attach to it) to the system's [[PDP-10 I/O Bus|I/O bus]], to allow the [[Central Processing Unit|CPU]] to control it.
  
 
It has limited capabilities, compared to most channels from other manufacturers: it supports only the following types of [[channel command word]]s:
 
It has limited capabilities, compared to most channels from other manufacturers: it supports only the following types of [[channel command word]]s:
Line 8: Line 8:
 
* Transfer data to/from memory
 
* Transfer data to/from memory
  
−
It is used with [[device controller]]s such as the [[RP10 disk controller‎]], [[TM10 Magnetic Tape Control]], and [[RH10 MASSBUS controller]].
+
It is used with device controllers such as the [[RP10 disk controller‎]], [[TM10 Magnetic Tape Control]], and [[RH10 MASSBUS controller]].
 +
 
 +
==Models==
 +
 
 +
* DF10
 +
 
 +
Introduced 1968 for use with the [[KA10]].  Control words have a negated 18-bit word count in the left half, and an 18-bit memory address in the right half.
 +
 
 +
* DF10-C
 +
 
 +
Introduced for use with the [[KI10]].  The memory address is expanded to 22 bits, and the control word is reduced to 14 bits.
 +
 
 +
* MIT modified DF10
 +
 
 +
Used on the [[Project MAC]] [[KA10]] DM and ML machines running [[Incompatible Timesharing System|ITS]].  The control word has the negated word count in bits 3-17, and the 21-bit memory address is split with bits 15-17 inverted in control bits 0-2, and bits 18-35 in the right half of the control word.
  
 
{{semi-stub}}
 
{{semi-stub}}
  
−
[[Category: DEC Storage Controllers]]
+
==External links==
 +
 
 +
* [http://bitsavers.org/pdf/dec/pdp10/periph/DEC-10-I8BA-D_DF10_Maint_Jun68.pdf DF10 Data Channel Maintenance Manual] (DEC-10-I8BA-D)
 +
* [http://bitsavers.org/pdf/dec/pdp10/periph/DEC-10-I8BB-D_DF10_Data_Channel_Maintenance_Manual_Feb70.pdf DF10 Data Channel Maintenance Manual] (DEC-10-I8BB-D)
 +
* [http://www.bitsavers.org/www.computer.museum.uq.edu.au/pdf/DEC-10-HDFC-D%20DF10%20Data%20Channel.pdf DF10 Data Channel Maintenance Manual] (DEC-10-HDFC-D)
 +
* [http://bitsavers.org/pdf/dec/pdp10/periph/A-MN-DF10-C_MAN1_DF10-C_Data_Channel_Maintenance_Manual_Oct74.pdf DF10-C Data Channel Maintenance Manual] (A-MN-DF10-C_MAN1)
 +
* [http://bitsavers.org/pdf/dec/pdp10/periph/DF10_Engineering_Drawings.pdf DF10 Engineering Drawings]
 +
* [http://bitsavers.org/www.computer.museum.uq.edu.au/pdf/DEC-10-XSRMA-A-D%20DECsystem10%20System%20Reference%20Manual.pdf DECsystem-10 System Reference Manual] - documents the DF10 in section 5-1 (pp. 183-188 of the PDF)
 +
 
 +
[[Category: PDP-10s]]

Latest revision as of 06:32, 6 September 2023

The DF10 Data Channel is a channel for the early PDP-10 models (KA10 and KI10) which had the PDP-10 Memory Bus as a standard bus. It can connect to multi-port memory banks either directly, or via an MX10 Memory Data Multiplexor. It is also connected indirectly (through the device controllers which attach to it) to the system's I/O bus, to allow the CPU to control it.

It has limited capabilities, compared to most channels from other manufacturers: it supports only the following types of channel command words:

  • End of program
  • Jump to new CCW list
  • Discard data
  • Transfer data to/from memory

It is used with device controllers such as the RP10 disk controller‎, TM10 Magnetic Tape Control, and RH10 MASSBUS controller.

Models

  • DF10

Introduced 1968 for use with the KA10. Control words have a negated 18-bit word count in the left half, and an 18-bit memory address in the right half.

  • DF10-C

Introduced for use with the KI10. The memory address is expanded to 22 bits, and the control word is reduced to 14 bits.

  • MIT modified DF10

Used on the Project MAC KA10 DM and ML machines running ITS. The control word has the negated word count in bits 3-17, and the 21-bit memory address is split with bits 15-17 inverted in control bits 0-2, and bits 18-35 in the right half of the control word.

External links

Retrieved from "https://gunkies.org/w/index.php?title=DF10_Data_Channel&oldid=31456"