Difference between revisions of "KE11-A Extended Arithmetic Element"
(rotate image) |
(mention replacement -B) |
||
| Line 10: | Line 10: | ||
(The last is used for implementation of [[floating point]] in [[software]].) | (The last is used for implementation of [[floating point]] in [[software]].) | ||
| − | It is implemented as a four-slot [[system unit]] (details below). | + | It is implemented as several [[DEC card form factor|quad]] and dual [[printed circuit board|boards]], plugged into a custom four-slot [[system unit]] (details below). |
The KE11-A was originally produced for use with the [[PDP-11/20]], whose [[KA11 CPU]] did not have multply, divide, or multi-bit shift operations. As a UNIBUS peripheral, not integrated into the [[Central Processing Unit|CPU]], it was also usable with other models, e.g. the [[PDP-11/05]] and [[PDP-11/04]], which likewise did not implement multiplication in [[hardware]], etc. | The KE11-A was originally produced for use with the [[PDP-11/20]], whose [[KA11 CPU]] did not have multply, divide, or multi-bit shift operations. As a UNIBUS peripheral, not integrated into the [[Central Processing Unit|CPU]], it was also usable with other models, e.g. the [[PDP-11/05]] and [[PDP-11/04]], which likewise did not implement multiplication in [[hardware]], etc. | ||
| − | The KE11-A can be operated with an optional [[KM11-A Maintenance Set]] in order to diagnose faults. | + | The KE11-A can be operated with an optional [[KM11-A Maintenance Set]] in order to diagnose faults. It was replaced by the [[KE11-B Extended Arithmetic Element]], a re-implementation on a single quad card. |
==Hardware== | ==Hardware== | ||
| − | The KE11-A consists of 3 | + | The KE11-A consists of 3 quad boards: |
* M7210 Data Control | * M7210 Data Control | ||
| Line 24: | Line 24: | ||
* M827 Clock and States | * M827 Clock and States | ||
| − | and a pair of M234 Register dual-height boards, plugged into | + | and a pair of M234 Register dual-height boards, plugged into the quad custom [[backplane]]. |
===Board locations=== | ===Board locations=== | ||
Revision as of 01:52, 30 December 2019
The KE11-A Extended Arithmetic Element is an autonomous UNIBUS peripheral which can perform a variety of arithmetic or logical operations:
- multiplication
- division
- multi-bit shifts
- logical shift
- arithmetic shift
- normalization
(The last is used for implementation of floating point in software.)
It is implemented as several quad and dual boards, plugged into a custom four-slot system unit (details below).
The KE11-A was originally produced for use with the PDP-11/20, whose KA11 CPU did not have multply, divide, or multi-bit shift operations. As a UNIBUS peripheral, not integrated into the CPU, it was also usable with other models, e.g. the PDP-11/05 and PDP-11/04, which likewise did not implement multiplication in hardware, etc.
The KE11-A can be operated with an optional KM11-A Maintenance Set in order to diagnose faults. It was replaced by the KE11-B Extended Arithmetic Element, a re-implementation on a single quad card.
Hardware
The KE11-A consists of 3 quad boards:
- M7210 Data Control
- M7211 Register Control
- M827 Clock and States
and a pair of M234 Register dual-height boards, plugged into the quad custom backplane.
Board locations
These are the board locations for the KE11-A (as seen from the board side of the backplane):
| Connector | ||||||
|---|---|---|---|---|---|---|
| Slot | A | B | C | D | E | F |
| 1 | UNIBUS In | M7210 Data Control | ||||
| 2 | Unused | KM11-A | M234 Register (low byte) |
M234 Register (high byte) | ||
| 3 | G772 Power |
Reserved | M7211 Register Control | |||
| 4 | UNIBUS Out | M827 Clock & States | ||||
