Difference between revisions of "Digital Ethernet UNIBUS Network Adapter"

From Computer History Wiki
Jump to: navigation, search
m (Undo dup category)
m (→‎See also: +4.2BSD driver for DEC Deuna Ethernet board)
 
Line 7: Line 7:
  
 
connected by a pair of BC08R [[flat cable]]s. (The manual advises that BC08S cables may be used instead of the BC08R's.) The M7792 used a [[T-11 chip]] to perform some functions; the [[Ethernet transceiver]] is connected to the M7793.
 
connected by a pair of BC08R [[flat cable]]s. (The manual advises that BC08S cables may be used instead of the BC08R's.) The M7792 used a [[T-11 chip]] to perform some functions; the [[Ethernet transceiver]] is connected to the M7793.
 +
 +
{{semi-stub}}
  
 
==See also==
 
==See also==
  
 +
* [[4.2BSD driver for DEC Deuna Ethernet board]]
 
* [[Digital Ethernet Large-scale-integration UNIBUS Adapter‎|DELUA]], the DEUNA's replacement
 
* [[Digital Ethernet Large-scale-integration UNIBUS Adapter‎|DELUA]], the DEUNA's replacement
−
 
−
{{semi-stub}}
 
  
 
<!--==Further reading==
 
<!--==Further reading==
Line 23: Line 24:
 
[[Category: UNIBUS Network Interfaces]]
 
[[Category: UNIBUS Network Interfaces]]
 
[[Category: Ethernet Interfaces]]
 
[[Category: Ethernet Interfaces]]
 +
[[Category: DEC Documentation Errors]]

Latest revision as of 02:25, 31 March 2025

A DEUNA board set.

The Digital Ethernet UNIBUS Network Adapter (usual name DEUNA) was DEC's first UNIBUS to Ethernet network interface. It consisted of two hex boards:

  • M7792 PORT MODULE
  • M7793 LINK MODULE

connected by a pair of BC08R flat cables. (The manual advises that BC08S cables may be used instead of the BC08R's.) The M7792 used a T-11 chip to perform some functions; the Ethernet transceiver is connected to the M7793.

See also

External links

Retrieved from "https://gunkies.org/w/index.php?title=Digital_Ethernet_UNIBUS_Network_Adapter&oldid=36055"