MX15-B Memory Multiplexer

The MX15-B Memory Multiplexer was part of the UNICHANNEL 15 System, which allowed a PDP-11 (usually a PDP-11/05 to act as a front end for a PDP-15.

The MX15-B allowed the PDP-11 (both the CPU, and DMA devices on the PDP-11's UNIBUS) access to the PDP-15's main memory, and also allowed the PDP-15 access to the PDP-11's memory.

Some DMA devices on the UNIBUS (such as the RK11-E) were able to do 18-bit transfers; they used the two UNIBUS parity lines for the two extra data bits of the 18-bit PDP-15. The two extra bits were not used by the PDP-11 or its memory, but went straight through the MX15-B, directly to the PDP-15's memory.

It included an arbiter, so that when the PDP-15 and PDP-11 (both of which are asynchronous) tried to interact with memory at the same time, a choice was made; the PDP-15 was given priority.

Memory addresses in the PDP-11 (which uses byte addressing) were converted to PDP-15 (word addressing) by dropping the low bits, and similarly for transfers in the other direction. It also converted DATIP and DATOB type UNIBUS cycles (which have no exact equivalents in the PDP-15's memory system) to PDP-15 memory operations with the same effect.