Difference between revisions of "MS11-P MOS memory"
(Formally the MS11-PB) |
m (→External links: + brochure) |
||
| Line 13: | Line 13: | ||
==External links== | ==External links== | ||
| + | * [http://bitsavers.org/pdf/dec/brochures/DEC-MS11-PB-UNIBUS-Memory.pdf MS11-PB UNIBUS Memory] - brochure | ||
* [http://bitsavers.org/pdf/dec/pdp11/memory/EK-MS11P-TM-001_Tech_Oct82.pdf MS11-P MOS Memory Technical Manual] (EK-MS11P-TM-001) | * [http://bitsavers.org/pdf/dec/pdp11/memory/EK-MS11P-TM-001_Tech_Oct82.pdf MS11-P MOS Memory Technical Manual] (EK-MS11P-TM-001) | ||
* [http://www.bitsavers.org/pdf/dec/pdp11/memory/MP01477_MS11P_Sep82.pdf MS11-P Field Maintenance Print Set] (MP01477) | * [http://www.bitsavers.org/pdf/dec/pdp11/memory/MP01477_MS11P_Sep82.pdf MS11-P Field Maintenance Print Set] (MP01477) | ||
[[Category: EUB Memories]] | [[Category: EUB Memories]] | ||
Latest revision as of 16:10, 18 August 2023
The MS11-P (formally, the MS11-PB; if there was an MS11-PA, nothing is now known of it) is a Extended UNIBUS MOS DRAM main memory card. As an EUB card, it can therefore only be plugged into the EUB slots on the PDP-11/24 or PDP-11/44 backplane.
It has ECC which automagically corrects single-bit errors, and detects double-bit errors. On power-on, the system is frozen (via negation of the ACLO UNIBUS signal) while the entire memory is cleared, to prevent spurious ECC errors. For diagnostic purposes, the ECC can be disabled, and there are also means for the CPU to read/write the ECC bits directly.
The access time is 490-535 nsec (read, typical/max; 215-230 nsec extra on error), 100-125 nsec (write); the cycle time is 680-750 nsec (read cycle) or 580-620 (write cycle). Memory refresh time is 675 nsec (typical; 725 nsec maximum), every 11.25-13.75 μsec.
It is a hex-height card, the M8743, and holds 1 Mbyte when fully populated with 64Kx1 DRAM chips. The memory is arranged as 8 banks, each 16 data bits wide, with 6 additional bits for the ECC.
It uses +5V only, unlike the earlier MS11-L and MS11-M MOS memories. The board has provision to use battery backup power to retain data during a power outage. Power requirements are 3.4-4.8A of +5V, and 2.0-2.8A of +5VBB.
External links
- MS11-PB UNIBUS Memory - brochure
- MS11-P MOS Memory Technical Manual (EK-MS11P-TM-001)
- MS11-P Field Maintenance Print Set (MP01477)
