Difference between revisions of "TU30 Magnetic Tape Transport"
(I actually found a manual for it) |
(No difference)
|
Latest revision as of 19:17, 9 February 2024
| TU30 | |
| Tape density: | 200/556/800 bpi |
|---|---|
| Tape speed: | 75 ips (Forward/Reverse) 225 ips (Rewind) |
| Data rate: | 60 kHz at 800 bpi |
| Size: | 30"W x 25"D x 69"H (in cabinet) |
The TU30 Magnetic Tape Transport was a magnetic tape drive from DEC; it required a controller to connect to its host machine. The transport section was a D3030 OEMed from the DATAMEC division of Hewlett-Packard. It was used with the PDP-8 (with the TC58 Tape Control Unit), the PDP-9 (with the TC59 Tape Control Unit), the PDP-15 (ditto), and the PDP-10 (with the TM10 Magnetic Tape Control).
It could store 5-23 Mbytes on a 2400' 0.5" wide magnetic tape carried on a standard 10-1/2" reel. The TU30 supported either 7-track operation at 200, 556, and 800 BPI, or 9-track at 800 bpi.
The tape transport utilizes a single pinch roller capstan, with vacuum columns. The TU30 drive contains a fair amount of electronics, in the form of FLIP CHIP modules in a 19" wide wire-wrap backplane (mounted horizontally in the base of the cabinet).
External links
- TU30 Tape Transport Maintenance Manual - Volume I: Logic (DEC-1O-H4GA-D)
