Installing UNIX Sixth Edition on Ersatz-11
Installing Unix V6 on the Ersatz-11 simulator can be a relatively simple process, depending on whether one simply wants to be able to say one has done it, or whether one wants a usable system.
See the external links below for detailed instructions which cover a range from the simplest ('I did it') to the most complex.
Controlling actual PDP-11s
To run an actual physical PDP-11 (e.g. an LSI-11) from a simulated Unix V6 running under Ersatz-11, first see Running an LSI-11 from Unix V6; then include a line of the form:
assign tt1: com1: /mode:9600,n,8,2 /dtr:on /rts:on
in the Ersatz-11 configuration file; the DTR and RTS can probably be dispensed with, and the speed and parity will have to be adjusted for the particular interface on the PDP-11, but the 8 bit size is key.
One will want to cable the simulated PDP-11 as a DTE (DE-9S to DB-25P cables to do this are easily available on eBay, etc); one can then cable the actual PDP-11 as a DCE, or use a null modem if it is also wired as a DTE.
See also
External links
| v • d • e UNIX Versions, Vendors and Related |
|---|
| Research Unix PDP-7 UNIX • V1 • V2 • V3 • V4 • V5 • V6 • V7 • V8 • V9 • V10 • LSX • MINI-UNIX • Unix/32V
AT&T - CB-UNIX • PWB/UNIX • USG UNIX • System III • System IV • System V BSD - 2.9 BSD • 2.10 BSD • 2.11 BSD • 3BSD • 4BSD • 4.1 BSD • 4.2 BSD • 4.3 BSD • 4.4 BSD BSD Descendants 386BSD • NetBSD • FreeBSD • OpenBSD • NeXTSTEP • Darwin |
| Other - xv6 • AMIX • SunOS • Solaris • ULTRIX • A/UX • XENIX • AIX • Dell UNIX |
