DR11 parallel interface

The DR11s were a series of parallel interfaces for the UNIBUS and QBUS. Some used DMA, others were programmed I/O.

They included, for the UNIBUS:

• DR11-A: programmed I/O, quad SPC slot
• DR11-B: DMA, 4-slot system unit
• DR11-C: single-board replacement for the DR11-A
• DR11-K
• DR11-L: double input-only
• DR11-M: double output-only
• DR11-W: hex single-board replacement for the DR11-B

and for the QBUS:

• DRV11: as for the DR11, on a dual card
• DRV11-J: 4 DRV11's on a dual card
• DRV11-B: DMA, quad card, 18-bit DMA addresses
• DRV11-WA: DMA, dual card, 22-bit DMA addresses

There is also a DRV11-C (M8040), but little is currently known about it.

Almost all use the same interface, except the DRV11-J, which for space reasons uses a different header on the card.