Difference between revisions of "KL10"
(rm possible mis-reading) |
(Even better on misunderstanding; mention X-Bus) |
||
| Line 25: | Line 25: | ||
The '''KL10''' was the third generation of [[PDP-10]] processors. It was built out of [[ECL]], on [[DEC card form factor|hex]] cards. It was the first [[Microcode|microprogrammed]] PDP-10 processor; the design was inspired by Stanford's [[Superfoonly]]. | The '''KL10''' was the third generation of [[PDP-10]] processors. It was built out of [[ECL]], on [[DEC card form factor|hex]] cards. It was the first [[Microcode|microprogrammed]] PDP-10 processor; the design was inspired by Stanford's [[Superfoonly]]. | ||
| − | The [[Central Processing Unit|CPU]] had two main units, the 'E Box' ('Execution') and the 'M Box' ('Memory'). It provided three types of [[bus]]ses to the rest of the components of the system; the 'E Bus', from the E Box; and the 'S Bus' ('Storage'), and later the 'C Bus' ('Channel'), from the M Box. The S Bus was for the attachment of [[main memory]] units, while the C Bus alowed [[Direct Memory Access|DMA]] accesss to main memory. | + | The [[Central Processing Unit|CPU]] had two main units, the 'E Box' ('Execution') and the 'M Box' ('Memory'). It provided three types of [[bus]]ses to the rest of the components of the system; the 'E Bus', from the E Box; and the 'S Bus' ('Storage'), and later the 'C Bus' ('Channel'), from the M Box. The S Bus was for the attachment of [[main memory]] units (it was later upgraded to something called the 'X Bus'), while the C Bus alowed [[Direct Memory Access|DMA]] accesss to main memory. |
Up to 4 [[DTE20 Interface]]s (which allowed connection of a [[PDP-11]] [[front end]]), and up to 8 [[RH20 MASSBUS controller]]s could be connected to the E Bus (the latter were also connected to the C Bus). At least one PDP-11, the 'master', was required; it could [[bootstrap]] the KL10, including loading the [[microcode]]. | Up to 4 [[DTE20 Interface]]s (which allowed connection of a [[PDP-11]] [[front end]]), and up to 8 [[RH20 MASSBUS controller]]s could be connected to the E Bus (the latter were also connected to the C Bus). At least one PDP-11, the 'master', was required; it could [[bootstrap]] the KL10, including loading the [[microcode]]. | ||
| Line 31: | Line 31: | ||
A [[DMA20 Memory Bus Controller]] could be attached to the S Bus, to provide an external memory bus (compatible with the earlier [[KA10]] and [[KI10]]). Similarly, an [[DIA20 In/Out Bus Controller]] could be attached to the E Bus, to provide a KA10/KI10 compatible I/O bus. | A [[DMA20 Memory Bus Controller]] could be attached to the S Bus, to provide an external memory bus (compatible with the earlier [[KA10]] and [[KI10]]). Similarly, an [[DIA20 In/Out Bus Controller]] could be attached to the E Bus, to provide a KA10/KI10 compatible I/O bus. | ||
| − | The KL10 was used in the [[DECsystem-10]] models | + | The KL10 was used in the [[DECsystem-10]] models 108x and 109x systems (initially with an external memory bus), and in the high-end 20xx systems of the [[DECSYSTEM-20]] line (with an internal memory bus). |
| + | |||
| + | Like its predecessor, the KI10, it was initially released in a single-processor version; a two-CPU version was released later. | ||
==Versions== | ==Versions== | ||
| Line 39: | Line 41: | ||
The earlier 'Model A' only supported a single DTE20, and no RH20s (the latter possibly as it had no C Bus); it was the later so-called 'Model B' KL10 which supported up to 4 DTE20s and up to 8 RH20s | The earlier 'Model A' only supported a single DTE20, and no RH20s (the latter possibly as it had no C Bus); it was the later so-called 'Model B' KL10 which supported up to 4 DTE20s and up to 8 RH20s | ||
| − | Later | + | Later KL10's (sometimes denoted as the 'KL10-PV' or 'KL10-R') supported the 'Extended' PDP-10 [[architecture]], with support for multiple 'sections' (256K-[[word]] [[address space]]s), available to both the [[kernel]] and the [[user]] (although apparently only [[TOPS-20]] supported the latter). |
| − | |||
| − | |||
==Well-known KL10's== | ==Well-known KL10's== | ||
Revision as of 15:05, 6 July 2019
| KL10 | |
| Manufacturer: | Digital Equipment Corporation |
|---|---|
| Architecture: | PDP-10 |
| Year Design Started: | January, 1972 |
| Year First Shipped: | June, 1975 |
| Form Factor: | mainframe |
| Word Size: | 36 bits |
| Logic Type: | ECL ICs |
| Design Type: | clocked synchronous, microcoded |
| Microword Width: | 80 |
| Microcode Length: | 1280 (Model A) 2K (Model B) |
| Clock Speed: | 500 nsec |
| Cache Size: | 2K words |
| Memory Speed: | 1.0 μsec (initial core memory), 500 nsec (later MOS main memory) |
| Physical Address Size: | 22 bits |
| Virtual Address Size: | 18 bits (Model A and B) 23 bits (Model E) |
| Memory Management: | paging, 512-word pages |
| Operating System: | TOPS-10, TOPS-20, ITS, WAITS, TENEX, TYMCOM-X |
| Predecessor(s): | KI10 |
| Successor(s): | none |
| Price: | US$250K (CPU), US$600K-1.2M (system) |
The KL10 was the third generation of PDP-10 processors. It was built out of ECL, on hex cards. It was the first microprogrammed PDP-10 processor; the design was inspired by Stanford's Superfoonly.
The CPU had two main units, the 'E Box' ('Execution') and the 'M Box' ('Memory'). It provided three types of busses to the rest of the components of the system; the 'E Bus', from the E Box; and the 'S Bus' ('Storage'), and later the 'C Bus' ('Channel'), from the M Box. The S Bus was for the attachment of main memory units (it was later upgraded to something called the 'X Bus'), while the C Bus alowed DMA accesss to main memory.
Up to 4 DTE20 Interfaces (which allowed connection of a PDP-11 front end), and up to 8 RH20 MASSBUS controllers could be connected to the E Bus (the latter were also connected to the C Bus). At least one PDP-11, the 'master', was required; it could bootstrap the KL10, including loading the microcode.
A DMA20 Memory Bus Controller could be attached to the S Bus, to provide an external memory bus (compatible with the earlier KA10 and KI10). Similarly, an DIA20 In/Out Bus Controller could be attached to the E Bus, to provide a KA10/KI10 compatible I/O bus.
The KL10 was used in the DECsystem-10 models 108x and 109x systems (initially with an external memory bus), and in the high-end 20xx systems of the DECSYSTEM-20 line (with an internal memory bus).
Like its predecessor, the KI10, it was initially released in a single-processor version; a two-CPU version was released later.
Versions
There were a number of variants over the lifetime of the KL10; the most significant division being between systems with an external memory bus, and those with an internal memory bus (the native S Bus).
The earlier 'Model A' only supported a single DTE20, and no RH20s (the latter possibly as it had no C Bus); it was the later so-called 'Model B' KL10 which supported up to 4 DTE20s and up to 8 RH20s
Later KL10's (sometimes denoted as the 'KL10-PV' or 'KL10-R') supported the 'Extended' PDP-10 architecture, with support for multiple 'sections' (256K-word address spaces), available to both the kernel and the user (although apparently only TOPS-20 supported the latter).
Well-known KL10's
There was a single KL10 ITS machine, MIT-MC. It was later renamed to MX after a KS10 took the 'MC' identity, and was finally shut down in 1988; it is now in storage at the Living Computers Museum. There was also a KL10 in the SAIL WAITS system.
