FP11-E Floating Point Processor: Difference between revisions
m link, typo |
m →External links: +FMPS, manual |
||
| Line 14: | Line 14: | ||
The FP11-E has its own microcode, 88 bits wide, to control its operation, and interaction with the main CPU. | The FP11-E has its own microcode, 88 bits wide, to control its operation, and interaction with the main CPU. | ||
==External links== | |||
* [http://www.bitsavers.org/pdf/dec/pdp11/1160/EK-FP11E-UG-001_FP11-E_Users_Guide_Dec77.pdf FP11-E floating-point processor user's guide] (EK-FP11E-UG-001) | |||
* [http://www.bitsavers.org/pdf/dec/pdp11/1160/MP-00429_FP11-E_Engineering_Drawings_Jun77.pdf FP11-E Field Maintenance Print Set] (MP00429) | |||
[[Category: PDP-11 Processors]] | [[Category: PDP-11 Processors]] | ||
Revision as of 11:12, 11 January 2022
The FP11-E Floating Point Processor is the optional hardware floating point unit for the KD11-K CPU of the PDP-11/60. The KD11-K provided the full FP11 floating point using microcode; the FP11-E was an option which provided considerably improved floating point performance.
It was a 4 hex board co-processor:
- Floating Point Next Micro-Address (FNUA - M7878)
- Floating Point Exponent (FLTEXP - M7879)
- Multiplying Network (MULNET - M7880)
- Floating Point ALU (FALU - M7881)
which mounted in slots 8-11 of the CPU's backplane. The main CPU can detect the presence of the FP11-E, and, if present, uses it to perform any floating point instructions found in the program.
Electrically, it connected directly to the CPU and is controlled by it; unidirectional data buses are provided to move information (including instructions) from the CPU to the FPP, and vice versa.
The FP11-E has its own microcode, 88 bits wide, to control its operation, and interaction with the main CPU.
External links
- FP11-E floating-point processor user's guide (EK-FP11E-UG-001)
- FP11-E Field Maintenance Print Set (MP00429)
