Difference between revisions of "PDP-15"
m (use new inst speed) |
m (→External links: +PDP-15 reference card) |
||
| Line 40: | Line 40: | ||
==External links== | ==External links== | ||
| + | * [http://www.bitsavers.org/pdf/dec/pdp15/ PDP-15] - documentation at [[Bitsavers]] | ||
| + | * [http://www.vaxarchive.org/hardware/pdp11/pdp15rc.tar PDP-15 reference card] (images in TAR file) | ||
* [http://www.bitsavers.org/pdf/dec/pdp9/DEC-09-H9ZA-D_RF09_Jul70.pdf RS09 DECdisk System Maintenance Manual] | * [http://www.bitsavers.org/pdf/dec/pdp9/DEC-09-H9ZA-D_RF09_Jul70.pdf RS09 DECdisk System Maintenance Manual] | ||
* [http://www.datormuseum.se/documentation-software/pdp-15-documentation PDP-15 documentation] | * [http://www.datormuseum.se/documentation-software/pdp-15-documentation PDP-15 documentation] | ||
Revision as of 10:39, 16 August 2022
| PDP-15 | |
| Manufacturer: | Digital Equipment Corporation |
|---|---|
| Year First Shipped: | February, 1970 |
| Form Factor: | minicomputer |
| Word Size: | 18 bits |
| Logic Type: | TTL ICs |
| Instruction Speed: | 1.6 μsec (basic) |
| Memory Speed: | 0.8 μsec |
| Physical Address Size: | 17 bits (128K words) |
| Virtual Address Size: | 12 bits (direct), 15 bits (indirect), 17 bits (indexed) |
| Memory Management: | bounds register; base and bounds pair (both optional) |
| Operating System: | DECsys, Keyboard Monitor System, Foreground/Background System, DOS-15, XVM/DOS, XVM/RSX, XVM/MUMPS, Advanced Monitor System |
| Predecessor(s): | PDP-9 |
| Successor(s): | None |
The PDP-15 was DEC's last 18-bit computer, and the only one implemented using integrated circuits. Its principal intended use was for real-time systems. A variety of models were offered, from the PDP-15/10 (with 4K words of main memory), to the PDP-15/40 (with 24K words, and two disks).
Instructions had a 4-bit opcode, one bit of indirect, and one of indexing. It was a load-store architecture, with a single accumulator. There were several other specialized registers, including an 'Index Register', and a 'Limit Register' for loop control.
Both multiply/divide and floating point support were hardware options (the former being standard on all but the lowest model). The FP15 floating point unit was a complete separate processor, but shared the instruction set space with the basic CPU.
KM15 memory management included a boundary register to set the boundary between protected and un-protected memory, and two modes for the CPU. A memory relocation option, the KT15, with a base and bounds register pair, was also available.
A large range of peripherals were available, including DECtape (via the TC15 controller), fixed-head disk (RS09 disk via the RF15 controller), and RP02 large disk (RP15 controller).
Later models supported an interface (the UNICHANNEL-15, UC15) to a satellite PDP-11 (usually a PDP-11/05), through which other PDP-11-native peripherals could be supported, including DMA directly into the PDP-15's memory through the MX15-B Memory Multiplexer. These sometimes used the UNIBUS adaption for 18-bit mode, where the two parity lines were recycled into 2 extra data lines.
Further reading
(All available online through BitSavers.)
- "PDP-15 Systems Reference Manual"
- "PDP-15 Systems User's Handbook: Volume I - Processor"
- "PDP-15 Systems User's Handbook: Volume II - Peripherals"
External links
- PDP-15 - documentation at Bitsavers
- PDP-15 reference card (images in TAR file)
- RS09 DECdisk System Maintenance Manual
- PDP-15 documentation
- Unearthing The PDP-15’s Operating Systems
