KD11-E/EA microcode

The engineering drawings for the KD11-E CPU and KD11-EA CPU provide nice flow charts for the microcode in these CPUs; with one tiny exception, the microcode in the two is identical. (The KD11-EA contains additional microcode associated with the FP11-A Floating-Point Processor, which is not covered here.)

The difference is that the microinstruction 17-JJ is stored in location 002 in the KD11-E, and location 0744 in the KD11-EA. The reason for the change is unknown.

The instructions/functionality covered on each page are as follows:

Page	Contents
2	Instruction fetch and dispatch
3	Double op, source fetch
4	MOV
5	Double op, byte or SUB
6	Double op, destination fetch
7	Single op, modified dest
8	Single op, non-modified dest
9	JMP
10	JSR
11	SWAB
12	Shift, rotate
13	MFPI
14	MTPI
15	MTPS
16	MFPS
17	MARK, BR, RTS, CLx, SEx, SOB, RTI, RTT, NEG, WAIT, RESET
18	MUL/DIV
19	MUL
20	MUL
21	DIV
22	DIV
23	ASH/ASHC
24	Shift right
25	Shift left
26	Power on, trap

The following table, indexed by microinstruction number (in octal), gives the location of each microinstruction in the flow diagrams, and the operation performed by that microinstruction.

During the transcription of this information, a number of errors in the drawings were found - places were two different microinstructions were assigned to the same location. These have been corrected (and checked against a dump of the microcode).

μinstruction	μcode flow diagram location	operation
000	2-A	Service intr/trap, store vector
001	26-M	Move PC to B
002
003	17-LL	Initialize system for 150msec
004	17-L	Destination register to PC
005	13-E	Fetch destination address, enable previous mode
006	17-R	PSW to R12
007	17-X	PSW to R12
010	14-D	Fetch word from top of stack
011	17-EE	Fetch top of stack
012	17-NN	No operation
013	17-OO	Vector to R15
014	17-MM	Service interrupt/trab, fetch vector
015	2-C	Increment PC, ubranch on instruction
016	2-B	Fetch next instruction, load into IR
017	26-A	Move vector to R15
020	17-A	Sign extend BREG
021	9-A	Jump address to PC
022	9-C	Jump address to BREG
023	9-D	Fetch jump address
024	9-B	Decrement RDST, enable stack overflow
025	9-G	Decrement RDST, enable stack overflow
026	9-I	Fetch index data
027	9-L	Fetch index data
030	11-A	Swap destination operatand to R12
031	11-C	Fetch swapped destination operand
032	11-E	Fetch swapped destination operand
033	11-G	Fetch destination address
034	11-D	Decrement RDST, enable stack overflow
035	11-I	Decrement RDST, enable stack overflow
036	11-K	Fetch index data
037	11-N	Fetch index data
040	7-A	Operate and load condition codes
041	7-B	Fetch destination operand
042	7-D	Fetch destination operand
043	7-F	Fetch destination address
044	7-C	Decrement RDST, enable stack overflow
045	7-H	Decrement RDST, enable stack overflow
046	7-K	Fetch index data
047	7-M	Fetch index data
050	4-A	Operate and load condition codes
051	4-B	Set up destination address
052	4-P	Set up destination address, increment RDST
053	4-F	Fetch destination address
054	4-C	Decrement RDST, enable stack overflow
055	4-H	Decrement RDST, enable stack overflow
056	4-J	Fetch index data
057	4-M	Fetch index data
060	6-A	Destination operand to BREG
061	6-B	Fetch destination operand
062	6-D	Fetch destination operand
063	6-F	Fetch destination address
064	6-C	Decrement RDST, enable stack overflow
065	6-I	Decrement RDST, enable stack overflow
066	6-L	Fetch index data
067	6-O	Fetch index data
070	5-A	Destination operand to BREG
071	5-B	Fetch destination operand
072	5-D	Fetch destination operand
073	5-F	Fetch destination address
074	5-C	Decrement RDST, enable stack overflow
075	5-H	Decrement RDST, enable stack overflow
076	5-K	Fetch index data
077	5-N	Fetch index data
100	13-A	Destination data to R12, enable previous mode
101	13-B	Move destination address to R12
102	13-D	Move destination address to R12
103	13-G	Fetch destination address
104	13-C	Decrement RDST, enable stack overflow
105	13-I	Decrement RDST, enable stack overflow
106	13-K	Fetch index data
107	13-N	Fetch index data
110	3-A	Source operand to R12 and BREG
111	3-B	Fetch source operand
112	3-D	Fetch source operand
113	3-F	Fetch source address
114	3-C	Decrement RSRC, enable stack overflow
115	3-H	Decrement RSRC, enable stack overflow
116	3-K	Fetch index data
117	3-N	Fetch index data
120	15-A	Destination operand to R12 and BREG
121	15-F	Fetch destination operand
122	15-H	Fetch destination operand
123	15-J	Fetch destination address
124	15-G	Decrement RDST, enable stack overflow
125	15-M	Decrement RDST, enable stack overflow
126	15-O	Fetch index data
127	15-R	Fetch index data
130	16-A	PSW data to R12
131	16-C	Place destination address on bus address lines
132	16-F	Destination address to bus, increment RDST
133	16-G	Fetch destination address
134	16-E	Decrement RDST, enable stack overflow
135	16-J	Decrement RDST, enable stack overflow
136	16-L	Fetch index data
137	16-O	Fetch index data
140	17-U	RDST to BREG
141	4-G	Increment RDST
142	4-I	Fetch destination address
143	4-Q	Setup destination address, enable KT maintenance
144	4-K	Increment PC
145	4-L	Determine destination address
146	4-N	Increment PC
147	4-O	Determine address of destination address
150	17-KK	Zero R12
151	10-A	Jump address to BREG
152	10-C	Jump address to BREG
153	10-D	Fetch jump address
154	10-B	Decrement RDST, jump address to BREG
155	10-F	Decrement RDST, enable stack overflow
156	10-H	Fetch index data
157	10-K	Fetch index data
160	8-A	Operate on operand, load condition codesx
161	8-B	Fetch destination operand
162	8-D	Fetch destination operand
163	8-F	Fetch destination address
164	8-C	Decrement RDST, enable stack overflow
165	8-H	Decrement RDST, enable stack overflow
166	8-K	Fetch index data
167	8-N	Fetch index data
170	12-A	Destination operand to BREG
171	12-C	Fetch destination operand
172	12-E	Fetch destination operand
173	12-G	Fetch destination addressa
174	12-D	Decrement RDST, enable stack overflow
175	12-I	Decrement RDST, enable stack overflow
176	12-L	Fetch index data
177	12-O	Fetch index data
200	17-I	Sign extend BREG
201	26-FF	Set R15 to 26
202	26-GG	Fetch new PSW
203	17-Q	Operate, set condition codes
204	17-W	Operate, set condition codes
205	3-E	Increment RSRC
206	3-G	Increment RSRC
207	3-I	Fetch source address
210	17-T	Operate, send condition codes
211	3-J	Fetch source operand
212	3-L	Increment PC
213	3-M	Determine source address
214	3-O	Increment PC
215	3-P	Determine address of source address
216	3-Q	Fetch source address
217	4-E	Get destination data and store, enable KT maintenance
220	18-A	Fetch multiplicand/divisor
221	18-B	Fetch multiplicand/divisor
222	18-D	Fetch multiplicand/divisor
223	18-F	Fetch destination address
224	18-C	Decrement RDST, enable stack overflow
225	18-H	Decrement RDST, enable stack overflow
226	18-J	Fetch index data
227	18-M	Fetch index data
230	23-A	Fetch shift count
231	23-B	Fetch shift count
232	23-D	Fetch shift count
233	23-F	Fetch destination address
234	23-C	Decrement RDST, enable stack overflow
235	23-H	Decrement RDST, enable stack overflow
236	23-J	Fetch index data
237	23-M	Fetch index data
240	17-V	RSRC to BREG
241	4-P	Fetch destination address
242	5-E	Increment RDST
243	5-G	Increment RDST
244	5-I	Fetch destination address
245	5-J	Fetch destination operand
246	5-L	Increment PC
247	5-M	Determine destination address
250	14-A	Move data to desination register
251	14-B	Move destination address to R13
252	14-F	Move destination address to R13
253	14-H	Fetch destination address
254	14-C	Decrement RDST, enable stack overflow
255	14-I	Decrement RDST, enable stack overflow
256	14-K	Fetch index data
257	14-N	Fetch index data
260	17-Z	Decrement RSRC, branch on 0
261	5-P	Determine address of destination address
262	5-Q	Fetch destination address
263	6-E	Increment RDST
264	6-G	Increment RDST
265	6-H	Operate and load condition codes
266	6-J	Fetch destination address
267	6-K	Fetch destination operand
270	17-P	RDEST to BREG
271	6-N	Determine destination address
272	6-P	Increment PC
273	6-Q	Determine address of destination address
274	6-R	Fetch destination address
275	7-E	Increment RDST
276	7-G	Increment RDST
277	7-I	Fetch destination address
300	7-J	Fetch destination operand
301	7-L	Increment PC
302	7-M	Determine destination address
303	7-O	Increment PC
304	7-P	Determine address of destination address
305	7-Q	Fetch destination address
306	8-E	Increment RDST
307	8-G	Increment RDST
310	8-I	Fetch destination address
311	8-J	Fetch destination operand
312	8-L	Increment PC
313	8-M	Determine desination address
314	8-O	Increment PC
315	8-P	Determine address of desination address
316	8-Q	Fetch destination address
317	9-E	Increment RDST
320	9-F	Jump address to PC
321	9-H	Fetch jump address
322	9-J	Increment PC
323	9-K	Determine jump address
324	9-M	Increment PC
325	9-N	Determine address of jump address
326	9-O	Fetch jump address
327	10-E	Increment RDST
330	10-G	Fetch jump address
331	10-I	Increment PC
332	10-J	Determine jump address
333	10-L	Increment PC
334	10-M	Determine address of jump address
335	10-N	Fetch jump address
336	10-O	Decrement SP
337	10-P	Set up bus address
3401	10-Q	Output RSRC to stack
341	10-R	Move PC to RSRC
342	10-S	BREG to PC
343	11-B	Load condition codes
344	11-F	Increment RDST
345	11-H	Increment RDST
346	11-J	Fetch destination address
347	11-L	Increment PC
350	11-M	Determine destination address
351	11-O	Increment PC
352	11-P	Determine address of destination address
353	11-Q	Fetch destination address
354	11-R	Fetch swapped destination address
355	11-S	Store data, load condition codes
356	12-B	Shift operand
3572	12-F	Increment RDST
360	12-H	Increment RDST
361	12-J	Fetch destination address
362	12-K	Fetch destination operand
363	12-M	Increment PC
364	12-N	Determine destination address
365	12-P	Increment PC
366	12-Q	Determine address of destination address
367	12-R	Fetch destination address
370	12-S	Shift operand
371	13-F	Increment RDST
372	13-H	Increment RDST
373	13-J	Fetch destination address
374	13-L	Increment PC
375	13-M	Determine destination address
376	13-O	Increment PC
377	13-P	Determine address of destination address
400	18-S	Complement & test sign of multiplicand
401	18-T	Test divisor for zero
402	19-A	Zero R17 and B, test multiplicand
403	19-J	Put multiplier in BX
404	21-A	Put one's complement of divisor in R13
405	19-D	Put one's complement of multiplier in R13
406	22-W	Set V bit
407	19-U	Shift right (partial product, multiplier), decrement counter
410	20-C	Test upper product for all 1's
411	20-L	Clear C bit
412	20-H	Test lower product for zero
413	19-M	Shift right (partial product, multiplier), decrement counter
414	20-J	Test MSB of lower product
415	20-G	Set C bit
416	20-I	Set Z bit
417	19-P	Store upper product
420	20-E	Set V bit
421	21-L	Fetch lower dividend
422	20-D	Test MSB of lower product
423	21-F	Take one's complement of upper dividend
424	21-M	Shift upper dividend left, test sign of divisor
425	21-O	Subtract divisor from dividend, test remainder
426	22-S	Set V bit
427	19-L	Subtract multiplicand from partial product
430	25-A	Test counter for 0, fetch upper part of operand
431	22-J	Clear V bit
432	26-N	Move PC to R5
433	19-T	Add multiplicand to partial product
434	24-A	Test IR9 to determine ASH/ASHC
435	21-N	Subtract divisor from dividend, test remainder
436	17-D	BREG to SP
437	19-Q	Store upper product
440	21-P	Test first quotient bit
441	22-B	Add divisor to remainder
442	21-G	Shift remainder left, test sign of divisor, test LSB of quotient
443	22-N	Srore remainder
444	22-D	Srore remainder
445	24-E	Save BX in B, clear N bit
446	22-A	Test quotient LSB and sign of divisor
447	24-D	Save BX in B, clear N bit
4503	17-II	Step SP
451	22-K	Add divisor to remainder
452	25-D	Test IR9 to determine ASH/ASHC, fetch lower part of operand
453	19-O	Subtract multiplicand from partial product
454	24-K	Clear C bit
455	13-R	Fetch destination data, enable previous mode
456	25-B	Test IR9 to determine ASH/ASHC
457	19-R	Store upper product
460	26-B	Move PSW to B
461	22-C	Test sign of dividend
462	22-Y	Set V bit
463	13-S	Decrement SP
464	24-U	Store lower result, clear N bit
465	24-X	Clear Z bit
466	24-T	Store lower result, clear N bit, test for 0
467	24-W	Clear Z bit
470	26-C	Increment vector address
471	22-L	Test sign of dividend
472	13-P	Set up bus address
473	19-N	Shift right (partial product, multiplier), decrement counter
474	14-G	Increment RDST
475	14-J	Fetch destination address
476	14-L	Increment PC
477	19-S	Store upper product
500	25-C	Clear BX to indicate C bit = 0
501	25-M	No operation
502	19-I	Zero R17 and B
503	19-B	Put multiplier in R12 and test sign
504	26-D	Fetch new PSW
505	19-C	Put one's complement of multiplier in R13
506	14-D	Increment PC
507	19-F	Shift right (100000, 100000)
510	14-P	Determine address of destination address
511	20-K	Set C bit
512	24-C	Store upper result, test sign of Z bit
513	14-R	Setup bus address, enable previous mode
514	14-Q	Fetch destination address
515	20-F	Clear C bit
516	24-B	Shift upper part of operand
517	24-O	Fetch lower part of operand
520	14-S	Output data to destination address
521	21-C	Fetch lower dividend
522	17-J	Shift BREG left one bit
523	17-K	Add offset to PC
524	22-V	Set V bit
525	17-M	Fetch top of stack
526	22-R	Clear V bit
527	17-N	Step stack to pointer
530	22-G	Clear U bit
531	22-I	Set V bit
532	22-H	Clear N bit, set Z bit
533	17-O	Load stack data into destination register
534	22-Q	Clear V bit
535	17-GG	Step SP
536	22-P	Clear N bit, set Z bit
537	17-HH	Fetch top of stack
540	26-KK	Clear IR to halt processor
541	17-S	Mask and set condition codes
542	17-Y	Mask and set condition codes
543	22-M	Srore remainder
544	22-E	Srore remainder
545	24-F	Save BX in B, set N bit
546	17-CC	Calculate offset
547	17-DD	Subtract offset from PC
550	24-M	Clear C bit
551	17-G	Data to R5
552	14-M	Determine destination address
553	17-B	Shift BREG left, R5 to BXREG
554	24-L	Set C bit
555	17-C	Add PC to BREG
556	17-E	BXREG to PC
557	17-F	Fetch top of stack
560	26-E	R6 <- R6-2, enable stack overflow
561	17-H	Step SP
562	26-F	Place SP address on bus lines
563	18-E	Increment RDST
564	24-V	Store lower result, set N bit
565	18-G	Increment RDST
566	26-G	Output old PSW, enable double bus errors
567	18-I	Fetch destination address
570	26-H	Decrement SP, enable stack overflow
571	18-K	Increment PC
572	26-I	Place SP address on bus lines
573	26-J	Push old PC on stack
574	18-L	Determine destination address
575	18-N	Increment PC
576	18-O	Determine address of destination address
577	26-K	Decrement vector address
600	18-P	Fetch destination address
601	18-Q	Fetch multiplicand/divisor
602	18-R	Load step counter, test IR9 for multiply/divide
603	19-E	Test two's complement of multiplier
604	19-G	Load B and R5 with 040000
605	19-H	Zero lower product
606	19-K	Test LSB of BX for first multiply step
607	20-A	Store lower product
610	20-B	C out is the sign of the product
611	20-M	Transfer condition codes to PSW
612	21-B	Fetch upper dividend and test sign
613	21-D	Take two's complement of lower dividend
614	22-F	Store quotient, clear N bit
615	22-O	Store quotient, set N bit
616	22-T	Clear C bit
617	22-U	Transfer condition codes to PSW
620	22-X	Set C bit
621	23-E	Increment RDST
622	23-G	Increment RDST
623	21-E	Take two's complement of upper dividend
624	23-I	Fetch destination address
625	23-K	Increment PC
626	23-L	Determine destination address
627	23-N	Increment PC
630	23-O	Determine address of destination address
631	23-P	Fetch destination address
632	23-Q	Fetch shift count
633	23-R	Test sign of counter
634	24-G	Set Z bit
635	24-H	Clear Z bit
636	24-I	V bit <- OVX
637	24-J	V bit <- OVX
640	21-J	Add divisor to remainder, test counter sign
641	24-N	Transfer condition codes to PSW
642	14-E	Increment SP
643	13-Q	Fetch destination address
644	14-T	Move stack data to R12
645	17-FF	Data to PC
646	26-L	Fetch new PC
647	26-CC	Add 2 to R15
650	21-K	Add divisor to remainder, test counter sign
651	25-N	Store upper result, test sign of Z bit
652	25-H	Clear BX so that 0's shift into B
653	25-E	Shift double operand left, decrement counter
654	26-DD	Set R15 to 5
655	25-K	Clear BX to indicate C bit is 0
656	26-EE	Set R15 to 013
657	25-F	Test R17 to determine C bit
660	21-H	Subtract divisor from remainder, test counter sign
661	5-O	Increment PC
662	6-M	Increment PC
663	15-I	Increment RDST
664	15-K	Increment RDST
665	15-N	Fetch destination address
666	15-L	Fetch destination operand
667	15-P	Increment PC
670	21-I	Subtract divisor from remainder, test counter sign
671	15-Q	Determine destination address
672	15-S	Increment PC
673	15-T	Determine address of destination address
674	15-U	Fetch destination address
675	15-B	Set R17 to all 1's
676	15-C	Set R17 equal to PSW address
677	15-D	Place PSW address on bus address lines
700	17-BB	Swap bytes, shift BREG left
701	20-N	Test upper product for zero
702	17-AA	No operation
703	24-R	Clear counter to indicate C bit is 0
704	15-E	Output destination operand to PSW
705	16-B	Move R12 to RDST
706	16-D	Move PSW data to R12
707	24-Q	Shift double operand right, increment counter
710	16-H	Increment RDST
711	16-K	Fetch destination address
712	16-M	Increment PC
713	16-N	Determine destination address
714	16-P	Increment PC
715	16-Q	Determine address of destination address
716	16-R	Fetch destination address
717	16-I	Place destination address on bus address lines
720	26-HH	Clear IR to halt processor
721	26-Z	Shift B left, zero B LSB
722	26-Q	Put all 1's in the PC
723	24-S	Store upper result, test sign of Z bit
724	26-S	Move all 1's to B
725	26-AA	Increment PC, branch on COUT
726	26-II	Clear IR to halt processor
727	24-P	Shift double operand right, increment counter
730	26-JJ	Clear IR to halt processor
731	26-O	Clear PC
732	26-U	Move 016 to counter
733	26-P	Test for 0 PC
734	26-R	Test for 0 PC
735	26-T	XOR PC and B
736	26-V	Clear B
737	26-X	Move B to BX
740	26-BB	Clear R15
741	26-LL	No operation
742	26-Y	Add PC and BX, decrement count
743	26-W	Put 1 in B
744	17-JJ	Data to PSW
745
746
747
750
751	25-G	Set counter to indicate C bit is 1
752
753	25-I	Shift single operand left, decrement counter
754
755	25-L	Set BX to indicate C bit is 1
756
757	25-J	Test R17 to determine C bit
760
761
762
763
764
765
766
767
770
771
772
773
774
775
776
777

Notes:

1 - prints say 346; '6' written for '0'
2 - prints say 375; digit swap
3 - prints say 540; digit swap