VAXstation 3100 series

VAXstation 3100
CPU Details
CPU technology:	CMOS
Memory
Minimum memory:	4MB (hardware limit; minimum configuration contains 8 MB)
Maximum memory:	32MB
I/O
LAN support:	Standard

The VAXstation 3100 was an improved (approximately three-four times faster than its predecessors) VAXstation intended for demanding graphics applications. It was created by adding a bit-mapped display to a MicroVAX 3100.

It used the second generation of VAX CMOS chip-set technology, the same as in the MicroVAX 3500/3600 and VAXstation 3200/3500.

There were three basic models in the VAXstation 3100 range, in two generations:

• VAXstation 3100 Model 30 - based on the CMOS-1 CVAX and performed at ~2.8VUPs
• VAXstation 3100 Model 38 - second generation, based on the CMOS-2 CVAX
• VAXstation 3100 Model 40 - the same board set as the Model 30, but in a slightly taller mounting box, so it could accommodate more mass storage options
• VAXstation 3100 Model 48 - again the same board set as the Model 38, but in the slightly taller mounting box
• VAXstation 3100 Model 76 - the final member of the series was Rigel-based; this doubled the performance to 7.6 VUPs

Depending on the configuration, it could be a disk-less network node, a stand-alone work-station, or also as a server for up to seven other VAXstations. An optional MS-DOS 'software coprocessor' allows it to run un-modified PC applications at full speed.

External links

• VAX 3100 - documentation at Bitsavers
  • VS 3100 Maintenance Guide (EK-285AA-MG-001)
• VAXstation 3100 Maintenance Guide Addendum: Options Installation (EK-331AA-AD-001)
• VAXStation 3100
• VaxStation 3100 - connectors, cables, etc
• VAXstation 3100 - DECUServe WORKSTATIONS Conference 8
• Video Devices
• VAXstation SPX