Difference between revisions of "FP11-B Floating-Point Processor"

From Computer History Wiki
Jump to: navigation, search
(+cats)
(update to use fp11 article)
Line 1: Line 1:
The '''FP11-B''' was a [[Floating point processor|FPP]] used in the [[PDP-11/45]] and [[PDP-11/70]] computers (KB11-A and KB11-B CPU variants thereof, respectively); it operated in parallel with the main processor, so that two instructions (one floating point, one regular) could be processed at the same time.
+
The '''FP11-B''' was a [[Floating point processor|FPP]] used in the [[PDP-11/45]] and [[PDP-11/70]] computers (KB11-A and KB11-B CPU variants thereof, respectively); it was the progenitor of the semi-standard [[FP11 floating point]] used in many [[PDP-11]]s.
  
It supported short (32 bit) and long (64 bit) floating point numbers; both forms used an 8 bit exponent (in 'excess 0200' notation, giving an exponent range of +127. to -128.), a sign bit, and the remaining bits were the fractional part. A state bit controlled whether the FP11-B operated in short or long mode.
+
It operated in parallel with the main processor, so that two instructions (one floating point, one regular) could be processed at the same time; unlike the later [[FP11-C Floating-Point Processor]] for these machines, it ran entirely asynchronously to the main CPU, and used a clock which was not synchronized to the basic CPU's clock.  
 
 
The FP11-B contained 6 internal registers, each capable of holding either a short or long floating point value.
 
  
 
==Implementation==
 
==Implementation==
  
The FP11-B runs entirely asynchronously to the main CPU; it used a clock which is not synchronized to the basic CPU's clock. It plugged into special pre-wired slots in the CPU's [[backplane]], and included the following boards:
+
It plugged into special pre-wired slots in the CPU's [[backplane]], and included the following boards:
  
 
* M8112 ROM and ROM Control
 
* M8112 ROM and ROM Control
Line 16: Line 14:
 
{{PDP-11}}
 
{{PDP-11}}
  
[[Category:DEC processors]]
 
 
[[Category:UNIBUS processors]]
 
[[Category:UNIBUS processors]]

Revision as of 13:58, 18 September 2016

The FP11-B was a FPP used in the PDP-11/45 and PDP-11/70 computers (KB11-A and KB11-B CPU variants thereof, respectively); it was the progenitor of the semi-standard FP11 floating point used in many PDP-11s.

It operated in parallel with the main processor, so that two instructions (one floating point, one regular) could be processed at the same time; unlike the later FP11-C Floating-Point Processor for these machines, it ran entirely asynchronously to the main CPU, and used a clock which was not synchronized to the basic CPU's clock.

Implementation

It plugged into special pre-wired slots in the CPU's backplane, and included the following boards:

  • M8112 ROM and ROM Control
  • M8113 Exponent and Data Path
  • M8114 Fraction Data Path - High Order
  • M8115 Fraction Data Path - Low Order