PDP-11/34

PDP-11/34
Manufacturer:	Digital Equipment Corporation
Architecture:	PDP-11

A PDP-11/34 partially disassembled; the board on the left is for the KY11-LB Programmer's Console

The PDP-11/34 was DEC's lower-cost replacement to the PDP-11/40 as the low-end PDP-11 system capable of running time-sharing, using memory management; it had the limited memory management capabilities of the PDP-11/40, though. It was a UNIBUS machine; as such, it was normally limited to 248KB of main memory.

The CPU came in two variants: the KD11-E (M7265 and M7266), and the plug-compatible replacement KD11-EA (M8265 and M8266); machines with the latter were denominated as a PDP-11/34A. Both required the DD11-P backplane.

The latter had provision for the FP11-A floating point unit, and the KK11-A cache (the system could use either, or both).

Both could be provided with either the KY11-LA Operator's Console (a limited functionality console with only halt and boot functionality), or the KY11-LB Programmer's Console.

Apparently it was cloned in the Soviet Union as the SM 1420.

Register access

Like its predecessor PDP-11/05, the general registers (R0-R5, SP and PC) have addresses assigned to them; they are also accessible from the UNIBUS, and therefore from the KY11-LB Programmer's Console, when the machine is halted. Their addresses are:

Address	Register
777700	R0
...
777705	R5
777706	SP
777707	PC

Note that the registers are word-accessible at odd addresses on the UNIBUS (unlike any other device); and their addresses, like those on the -11/05, increment by 1, not by 2, as is usual for word-sized items.

In addition, some internal CPU registers are available at addresses 777710 -777717.

External links

• Knob with 3/8 Post & 1/4" D Shaft - replacement power knob