Difference between revisions of "KDF11-A CPU"
(+jumpers, details) |
m (+manual, FMPS) |
||
| Line 1: | Line 1: | ||
[[Image:KDF11-ATop.jpg|250px|thumb|right| CPU]] | [[Image:KDF11-ATop.jpg|250px|thumb|right| CPU]] | ||
| − | The '''KDF11-A CPU''' is [[PDP-11]] [[Central Processing Unit|CPU]] for the [[QBUS]]; it is a [[DEC card form factor|dual]]-width [[printed circuit board|card]], the M8186. It uses the same 'Fonz' [[F-11 chip set]] as the other [[KDF11 CPUs]]. | + | The '''KDF11-A CPU''' is a [[PDP-11]] [[Central Processing Unit|CPU]] for the [[QBUS]]; it is a [[DEC card form factor|dual]]-width [[printed circuit board|card]], the M8186. It uses the same 'Fonz' [[F-11 chip set]] as the other [[KDF11 CPUs]]. |
It contains only the basic CPU, unlike the other KDF-11's: no [[Read-only memory|ROM]], no [[asynchronous serial line]]s, etc. It does support the optional [[KTF11-A memory management chip]] and the [[KEF11-A floating point chip]], but not the [[KEF11-B]] [[PDP-11 Commercial Instruction Set]] (CIS); for higher performance [[floating point]], the [[FPF11 floating point processor]] may be used. | It contains only the basic CPU, unlike the other KDF-11's: no [[Read-only memory|ROM]], no [[asynchronous serial line]]s, etc. It does support the optional [[KTF11-A memory management chip]] and the [[KEF11-A floating point chip]], but not the [[KEF11-B]] [[PDP-11 Commercial Instruction Set]] (CIS); for higher performance [[floating point]], the [[FPF11 floating point processor]] may be used. | ||
| − | The first version of the KDF11-A (Revision A) only suppported 256 Kbytes of [[main memory]]; later versions supported up to 4 Mbytes (but their [[QBUS CPU ODT|ODT]]'s | + | The first version of the KDF11-A (Revision A) only suppported 256 Kbytes of [[main memory]]; later versions supported up to 4 Mbytes (but their [[QBUS CPU ODT|ODT]]'s [[address space]] is limited to 256 Kbytes). In the later models, a bit in the [[PDP-11 Memory Management#Control|SSR3]] CPU [[register]] must be set to allow use of more than 256 Kbytes. |
==Configuration== | ==Configuration== | ||
| Line 62: | Line 62: | ||
| In || Out || PC=configuration jumpers <!--, PS=340 --> | | In || Out || PC=configuration jumpers <!--, PS=340 --> | ||
|- | |- | ||
| − | | In || In || Extended [[microcode]] (trap to 010 if none) | + | | In || In || Extended [[microcode]] ([[trap]] to 010 if none) |
|} | |} | ||
| + | |||
| + | ==External links== | ||
| + | |||
| + | * [http://www.bitsavers.org/pdf/dec/pdp11/1123/EK-KDF11-UG-PR2_Mar79.pdf KDF11-AA User's Guide] (EK-KDF11-UG-PR2) | ||
| + | * [http://www.bitsavers.org/pdf/dec/pdp11/1123/MP00734_KDF11A_EngrDrws.pdf KDF11-A Field Maintenance Print Set] (MP00734) | ||
{{PDP-11}} | {{PDP-11}} | ||
Revision as of 03:44, 19 November 2021
The KDF11-A CPU is a PDP-11 CPU for the QBUS; it is a dual-width card, the M8186. It uses the same 'Fonz' F-11 chip set as the other KDF11 CPUs.
It contains only the basic CPU, unlike the other KDF-11's: no ROM, no asynchronous serial lines, etc. It does support the optional KTF11-A memory management chip and the KEF11-A floating point chip, but not the KEF11-B PDP-11 Commercial Instruction Set (CIS); for higher performance floating point, the FPF11 floating point processor may be used.
The first version of the KDF11-A (Revision A) only suppported 256 Kbytes of main memory; later versions supported up to 4 Mbytes (but their ODT's address space is limited to 256 Kbytes). In the later models, a bit in the SSR3 CPU register must be set to allow use of more than 256 Kbytes.
Configuration
A limited amount of configuration can be done with a number of jumpers in various locations (which differ depending on etch revision, with block of eleven in the middle of the card.Their functions are:
| Jumper | Function | In | Out |
|---|---|---|---|
| W1 | Master Clock | Enabled | Disabled |
| W2 | Reserved | Factory | Do not remove |
| W3 | Unknown | ||
| W4 | Event line | Disabled | Enabled |
| W5 | Powerup option bit 1 | ||
| W6 | Powerup option bit 2 | ||
| W7 | Halt enable | Halt | Trap to 4 |
| W8 | Bootstrap address 0173000 | Yes | W9-W15 |
| W09 | Bootstrap address bit 9 | 1 | 0 |
| W10 | Bootstrap address bit 10 | 1 | 0 |
| W11 | Bootstrap address bit 11 | 1 | 0 |
| W12 | Bootstrap address bit 12 | 1 | 0 |
| W13 | Bootstrap address bit 13 | 1 | 0 |
| W14 | Bootstrap address bit 14 | 1 | 0 |
| W15 | Bootstrap address bit 15 | 1 | 0 |
| W16 | Reserved | Factory | Do not remove |
| W17 | Reserved | Factory | Do not remove |
| W18 | Wakeup circuit | Disabled | Enabled |
Powerup options are:
| W6 | W5 | Action |
|---|---|---|
| Out | Out | PC from 024, PS from 026 |
| Out | In | ODT |
| In | Out | PC=configuration jumpers |
| In | In | Extended microcode (trap to 010 if none) |
External links
- KDF11-AA User's Guide (EK-KDF11-UG-PR2)
- KDF11-A Field Maintenance Print Set (MP00734)
| v • d • e PDP-11 Computers and Peripherals |
|---|
| UNIBUS PDP-11s - PDP-11/20 • PDP-11/15 • PDP-11/35 • PDP-11/40 • PDP-11/45 • PDP-11/50 • PDP-11/55 • PDP-11/70 PDP-11/05 • PDP-11/10 • PDP-11/04 • PDP-11/34 • PDP-11/60 • PDP-11/44 • PDP-11/24 • PDP-11/84 • PDP-11/94 QBUS PDP-11s - PDP-11/03 • PDP-11/23 • PDP-11/23+ • MicroPDP-11/73 • MicroPDP-11/53 • MicroPDP-11/83 • MicroPDP-11/93 QBUS CPUs: LSI-11 • LSI-11/2 • KDF11-A • KDF11-B • KDJ11-A • KDJ11-B • KDJ11-D • KDJ11-E Buses: UNIBUS • UNIBUS map • SPC • MUD • EUB • QBUS • CD interconnect • PMI Also: PDP-11 architecture • PDP-11 Extended Instruction Set • FP11 floating point • PDP-11 Memory Management |
| UNIBUS CPUs: KA11 • KC11 • KB11-A • KB11-B • KB11-C • KB11-D • KD11-A • KD11-B • KD11-D • KD11-E • KD11-EA • KD11-K • KD11-Z • KDF11-U
Co-processors: FP11-A • FP11-B • FP11-C • FP11-E • FP11-F • KE44-A • FPF11 Chips: LSI-11 • KEV11-A • KEV11-B • KEV11-C • F-11 • KEF11-A • KTF11-A • T-11 • J-11 • FPJ11 CPU options: KE11-E • KE11-F • KJ11-A • KT11-C • KT11-D • KK11-A • KK11-B • KT24 • KTJ11-B Rare CPU options: KS11 Memory Protection and Relocation option • KT11-B Paging Option • KUV11 Writeable Control Store Front panels: KY11-A • KY11-D • KY11-J • KY11-LA • KY11-LB • KY11-P More on buses: UNIBUS and QBUS termination • Bus Arbitration on the Unibus and QBUS • CTI BUS PDT-11s - PDT-11/110 • PDT-11/130 • PDT-11/150 CTI PDP-11s - PRO-325 • PRO-350 • PRO-380 Other: FIS floating point • PDP-11 Commercial Instruction Set • PDP-11 stacks • PDP-11 family differences |
