Difference between revisions of "PDP-11/60"

From Computer History Wiki
Jump to: navigation, search
(Add hardware info)
(memory, boxes)
 
(2 intermediate revisions by the same user not shown)
Line 9: Line 9:
 
==Hardware==
 
==Hardware==
  
The PDP-11/60 is based around the [[KD11-K CPU]]. It provided the full [[FP11 floating point]] using microcode; as an option, the [[FP11-E Floating Point Proceesor]], which provided a high-performance implementation as a [[co-processor]], was also available.
+
The PDP-11/60 is based around the [[KD11-K CPU]]. It provided the full [[FP11 floating point]] using microcode; as an option, the [[FP11-E Floating Point Processor]], which provided a high-performance implementation as a [[co-processor]], was also available.
  
A single slot in the [[Central Processing Unit|CPU]]'s [[backplane]] is available to hold either a User Control Store
+
A single slot in the [[Central Processing Unit|CPU]]'s [[backplane]] is available to hold either a User Control Store (1KW of read-write microcode), an Extended Control Store (1.5KW [[Read-only memory|ROM]] microcode), or a Diagnostic Control Store.
(1KW of read-write microcode), an Extended Control Store (1.5KW [[Read-only memory|ROM]] microcode), or a Diagnostic Control Store.
+
 
 +
Standard [[main memory]] was either [[MM11-W core memory|MM11-WP]] [[core memory]], or [[MF11S-KF MOS Memory]].
 +
 
 +
The -11/60 used swing-out [[BA11-P card cage]]s to hold all its [[printed circuit board|cards]]; generally a pair, one holding the [[Central Processing Unit|CPU]] and [[device controller]]s, the other main memory and more controllers.
  
 
==hampage.hu==
 
==hampage.hu==
Line 25: Line 28:
  
 
{{semi-stub}}
 
{{semi-stub}}
 +
 +
==External links==
 +
 +
* [http://www.bitsavers.org/pdf/dec/pdp11/1160/ PDP-11/60] - BitSavers
 +
** [http://www.bitsavers.org/pdf/dec/pdp11/1160/EK-11060-OP-003_PDP-1160_installation_and_operation_manual_Feb78.pdf PDP-11/60 installation and operation manual] (EK-11060-OP-003)
 +
** [http://www.bitsavers.org/pdf/dec/pdp11/1160/EK-11060-SV-01_1160cab_Feb78.pdf PDP-11/60 cabinet and power supply manual] (EK-11060-SV-01)
 +
** [http://www.bitsavers.org/pdf/dec/pdp11/1160/MP00166_1160_System.pdf 11/60 Systems Field Maintenance Print Set] (MP00166)
  
 
{{PDP-11}}
 
{{PDP-11}}
  
 
[[Category: UNIBUS PDP-11s]]
 
[[Category: UNIBUS PDP-11s]]

Latest revision as of 15:34, 11 January 2022

PDP-11/60

The PDP-11/60 was, in its day, a rather unsuccessful model of DEC's PDP-11 line; although considerable more complex than the PDP-11/34, it did not have significant capability advantages over it.

In particular, it had the same limited memory management, without so-called 'I+D separatation', which therefore limited the size of the applications which could run on it; it also supported only the UNIBUS, which normally limited it to 248KB of main memory.

It is of interest now since it had an option to permit loadable microcode; it is a very rare machine, though, since its lack of commercial success meant very few were produced.

Hardware

The PDP-11/60 is based around the KD11-K CPU. It provided the full FP11 floating point using microcode; as an option, the FP11-E Floating Point Processor, which provided a high-performance implementation as a co-processor, was also available.

A single slot in the CPU's backplane is available to hold either a User Control Store (1KW of read-write microcode), an Extended Control Store (1.5KW ROM microcode), or a Diagnostic Control Store.

Standard main memory was either MM11-WP core memory, or MF11S-KF MOS Memory.

The -11/60 used swing-out BA11-P card cages to hold all its cards; generally a pair, one holding the CPU and device controllers, the other main memory and more controllers.

hampage.hu

Front console of a PDP-11/60
Quote:

1977. The /60 was an expensive "middle-class" machine, intended as the successor of the /40. It should have been introduced after the /70, but was delayed at least 12-18 months due design and debugging problems. It had a writable control store (WCS) for custom instructions, and floating point instructions were implemented in the CPU microcode. It also had 18-bit memory management. With the FPP option it had the best floating point performance among the -11's. As for packaging, it came in the "low boy/high boy" cabinets, the one pictured to the left is the "high" one. The storage devices could be placed in the upper region, the card cage itself was in the lower half.

External links