Difference between revisions of "KB11-C CPU"

From Computer History Wiki
Jump to: navigation, search
(Mention main difference between FP11-B/C)
(Move text from -11/70 article)
Line 15: Line 15:
 
respectively.
 
respectively.
  
'''''Note''''': ''The "PDP-11/70 Maintenance and Installation Manual", EK-11070-MM-002, refers to the M8133 in board lists for the KB11-C where M8123 is meant.''
+
'''''Note''''': ''The DEC documentation contains an error here. The "PDP-11/70 Maintenance and Installation Manual", EK-11070-MM-002, refers to the M8133 in board lists for the KB11-C, where the M8123 is meant (e.g. pg. 1-3). However the KB11-C Engineering Drawings include the drawings for the M8123, not the M8133; other manuals also confirm that the KB11-C uses the M8123 (see, for example, the KB11-A,D Maintainence Manual, EK-KB11A-MM-004, pg 1-1).''
  
 
{{PDP-11}}
 
{{PDP-11}}
  
[[Category: UNIBUS PDP-11s]]
+
[[Category: PDP-11 Processors]]
 +
[[Category: UNIBUS Processors]]

Revision as of 23:08, 13 May 2018

The KB11-C CPU is the later CPU for the PDP-11/70; it is basically the same as the earlier KB11-B CPU, except that it takes the later synchronous FP11-C Floating-Point Processor, instead of the asynchronous earlier FP11-B Floating-Point Processor

Boards

The basic KB11-C consisted of fifteen hex boards, basically the same board set as the earlier KB11-B, except that two boards:

  • M8133 ROM and ROM Control
  • M8138 System Status Registers

were replaced with the:

  • M8123 ROM and ROM Control
  • M8138-YA System Status Registers

respectively.

Note: The DEC documentation contains an error here. The "PDP-11/70 Maintenance and Installation Manual", EK-11070-MM-002, refers to the M8133 in board lists for the KB11-C, where the M8123 is meant (e.g. pg. 1-3). However the KB11-C Engineering Drawings include the drawings for the M8123, not the M8133; other manuals also confirm that the KB11-C uses the M8123 (see, for example, the KB11-A,D Maintainence Manual, EK-KB11A-MM-004, pg 1-1).