Difference between revisions of "FP11-A Floating-Point Processor"

From Computer History Wiki
Jump to: navigation, search
m (clarify)
m (Proper cat)
Line 5: Line 5:
 
The latter over-the-top connector uses the connectors on the M8266 card which normally hold the maintenance cables to the [[KY11-LB Programmer's Console]]; in systems with a KY11-LB, the cables to the console will now connect to the M8267 card. (This is all necessitated because the FP11-A needs access to signals carried over the maintenance cables.)
 
The latter over-the-top connector uses the connectors on the M8266 card which normally hold the maintenance cables to the [[KY11-LB Programmer's Console]]; in systems with a KY11-LB, the cables to the console will now connect to the M8267 card. (This is all necessitated because the FP11-A needs access to signals carried over the maintenance cables.)
  
{{stub}}
+
{{semi-stub}}
  
 
{{PDP-11}}
 
{{PDP-11}}

Revision as of 20:52, 18 October 2018

The FP11-A Floating-Point Processor is the optional hardware floating point unit for the PDP-11/34A (KD11-EA CPU). It supports the full PDP-11 FP11 floating point.

It consists of a single hex board, the M8267. Its connections to the KD11-EA include two over-the-top connectors; a 20-pin connector to the M8265 card of the KD11-EA, and a 10 pin connector to the M8266 card.

The latter over-the-top connector uses the connectors on the M8266 card which normally hold the maintenance cables to the KY11-LB Programmer's Console; in systems with a KY11-LB, the cables to the console will now connect to the M8267 card. (This is all necessitated because the FP11-A needs access to signals carried over the maintenance cables.)