Difference between revisions of "KD11-E CPU"

From Computer History Wiki
Jump to: navigation, search
m (Jnc moved page KD11-E to KD11-E CPU: consistentnaming)
(tweaks)
Line 1: Line 1:
 
The '''KD11-E CPU''' was the first [[CPU]] version for the [[PDP-11/34]]; it consisted of two [[DEC card form factor|hex]] boards, the M7265 Data Paths module and the M7266 Control module.
 
The '''KD11-E CPU''' was the first [[CPU]] version for the [[PDP-11/34]]; it consisted of two [[DEC card form factor|hex]] boards, the M7265 Data Paths module and the M7266 Control module.
  
Although it supported the [[KY11-LB Programmer's Console]], including the maintainence functionality which allow the CPU's [[microcode]] to be [[single-stepping|single-stepped]], it did not support the [[FP11-A]] [[FP11 floating point|floating point]] unit or the [[KK11-A]] [[cache]]; a system needed the upgraded [[KD11-EA]] for that.
+
Although it supported the [[KY11-LB Programmer's Console]], including the maintainence functionality which allow the CPU's [[microcode]] to be [[single-stepping|single-stepped]], it did not support the [[FP11-A Floating-Point Processor|FP11-A]] [[FP11 floating point|floating point]] unit or the [[KK11-A]] [[cache]]; a PDP-11/34 system needed the upgraded [[KD11-EA]] for that.
  
 
==KY11-LB Interface==
 
==KY11-LB Interface==

Revision as of 01:45, 1 July 2017

The KD11-E CPU was the first CPU version for the PDP-11/34; it consisted of two hex boards, the M7265 Data Paths module and the M7266 Control module.

Although it supported the KY11-LB Programmer's Console, including the maintainence functionality which allow the CPU's microcode to be single-stepped, it did not support the FP11-A floating point unit or the KK11-A cache; a PDP-11/34 system needed the upgraded KD11-EA for that.

KY11-LB Interface

The interface to the KY11-LB is carried over two 10-wire cables connected to Berg headers (denominated J1 and J2) on the Mx266 module; these carried the micro-PC (from the CPU), and 'Manual Clock Enable' and 'Manual Clock' lines. The pinout is:

J1:

  1. Micro-PC 04
  2. Micro-PC 01
  3. Micro-PC 02
  4. Micro-PC 03
  5. Manual Clock Enable
  6. Micro-PC 00
  7. Micro-PC 05
  8. Micro-PC 06
  9. Micro-PC 07
  10. Manual Clock

J2:

  1. Micro-PC 08